Kaiser System V Copystands are suitable for a variety of uses such as copying of drawings, paintings & photographs. 

Your existing camera is attached to a copy arm holder and can readily be moved up and down the column as well as extended in reach depending upon the model selected.

RS2 XA
Camera Stand

Code No.: 5411

Non-reflective matt grey baseboard with printed fine grid and cm/inch scale. Matt-black anodised aluminum section tube column with cm/inch scale. Hand-cranked height adjustment by friction drive in plastic bearings. With horizontally adjustable camera arm to change the distance to the column, moves approx. 7 cm (2.7 in.) back and forth. 1/4" mounting thread. 

Baseboard (WxHxD): approx. 400 x 25 x 500 mm (15.7 x 1 x 19.7 in.)
Column height: approx. 76 cm (30 in.)
Maximum load: 1.5 kg (3.3 lbs)

NB. The optional Lighting units are attached to the baseboard to complete the system.

RS1
Camera Stand

Code No.: 5510

More Infos:

Non-reflecting matt gray base board with printed fine grid. Feet adjustable in height. Spirit level in column base. Extra-wide and extremely vibration-resistant column of dull black anodized aluminium tubing with cm and inch scales. Hand crank-operated height adjustment by friction drive on plastic bearings. Weight compensation by roll-off spring mechanism.

Base board: approx. 450 x 500 x 28 mm (17.7 x 19.7 x 1.1 in.)
Column height: approx. 1000 mm (39.4 in.)

5511: RS 1 Camera Stand with RT 1 copy and titling arm with two camera fastening points. Interchangeable threaded bush 1/4"/ 3/8". Camera carrier pivots and slides horizontally. Maximum load: 3 kg (6.6 lbs.)

5510: RS 1 Camera Stand with RA 1 camera arm with interchangeable threaded bush 1/4"/ 3/8" and camera adjustment device.
Maximum load: 4 kg (8.8 lbs.)

5507: RS 1 "microdrive" Camera Stand 
Same as RS 1 Camera Stand (5510), but with hand-cranked, rack-and-pinion height adjustment, additionally counter-balanced by a built-in scroll spring. Additional fine drive with 1:10 step-down transmission for super-fine adjustment. Locking screw prevents inadvertent changing of the adjusted height.

NB. The optional Lighting units are attached to the baseboard to complete the system.

RSX
Camera Stand

Code No.: 5512

More Info:
Big non-reflecting matt grey baseplate with printed grid, cm and inch scale. Feet adjustable in height. Spirit level in column base. Especially wide and low-vibration column made of matt black anodized aluminium tubing with cm and inch scale. Height adjustment with hand crank and rack with extra weight compensation by integrated coil spring. Blocking screw to stop accidental changing of height. RTX camera arm with adjustable and pivotable camera holder. Camera can be mounted forwards or backwards. Camera platform can be horizontally adjusted by fine mechanism. Interchangeable 1/4"/ 3/8" mounting thread. Including dust hood. 

Baseplate: approx. 600 x 500 x 32 mm
(23.6 x 19.7 x 1.3 in.)
Height of column: 1.20 m (4 ft.)
Loading capacity: 3.5 kg (7.7 lbs.) max.

NB. The optional Lighting units are attached to the baseboard to complete the system.

"reprokid"
Camera Stand

Code No.: 5360

Super-compact camera stand for small, lightweight cameras (APS, digital compacts, CCD cameras, etc.). Non-reflective, matt-black baseboard. Column with cm/inch scale. Height-adjustable camera arm. 1/4" mounting thread.

Baseboard (WxHxD): 32 x 1.9 x 38 cm (12.6 x 0.7 x 15 in.)
Column height: 59 cm (23.2 in.)
Max. load: 1 kg (2.2 lbs.) 

Includes lighting unit with two E 27 screw-in mounts for lamps up to 250 Watt (supplied without lamps). Power cable: 2 x 2.5 m (8 ft. 2 in.).

Suitable lamps:
3128: Reflector lamp 150 W, 3200 K

5361: "reprokid" Camera Stand
Same as 5360, but without lighting unit.